Axial vector engine

Axial vector engine 12 cylinder concept 26500cc/1618ci in
SolidWorks
Cylinders =12 (6 both sides)
Bore Dia = 80mm
Stroke length = 110mm
Engine Type = Axial Vector Type 4 Stroke
Crank Mechanism = CAM Disk Mechanism
Engine Capacity = 26500cc/1618ci
A swashplate is rigidly fixed to the CAMDisk, and goes round
with it as a unit. Therefore the connecting rods are not fixed
to the plate in any way, but push on it with rollers or slipper
pads that can glide over the surface of the plate as it turns.
The main point of attraction is the use of CAM-Disk in place
of Crank shaft to provide reciprocation. Since the Engine is
double Reciprocatory with corresponding strokes at both
sides, there is no unbalancing of masses i.e. full balanced.
Battery Ignition System is used with a spark plug for each
cylinder. There are one inlet and one exhaust for each
cylinder. Fins thickness is not calculated but 5mm is more
than enough. Fuel Type used is Gasoline and the engine can
found application in Aerospace as well as Automotive. Engine
is mainly a torque converter type rather than speeder.