Mechanical Engineering Vision

Thursday, 15 January 2015

How to prepare for GATE, PSU, IES?

How to prepare for PSU using my notes?

Please follow the step by step procedure given below for preparing PSU where only objective type
questions are asked.
General guidelines

I found that in all competitive examinations similar type of questions are asked. They are alike but not the same. The questions are not repeated but the theory (Funda) which needed to solve the question
remains same. So you don’t need to remember the questions and answers but you must remember the
funda behind it. Previously it was not like that. Because that time the
question paper was set by PSU people. Most of the questions were copied from the book of R.K. Jain. Now every PSU papers are set by Professors of IITs or renowned Institutes. Professors don’t copy questions but they check student’s fundamentals of the subject. So we must be prepared with fundamentals. That’s why funda is repeated.

You know that in the engineering books are not made for objective type questions. The theory involves
rigorous derivations, enormous calculations etc and our University examination is also conventional
type. We have to prepare for Objective Questions. For that first read the book carefully try to solve my
question set with your own and check with my explanations. Mark with a pencil in your books which
funda is needed to solve this problems.

For clearing doubts or any time
if you have any confusion Open a PDF file from the folder “Search for solving Question” and press key Shift+Ctrl+F then type any
keyword and search. Use down arrow key in the result.
Doing this 99% confusion will be clear. If confusion is not clear yet call me or mail me.

S K Mondal Contact: swapan_mondal_01@yahoo.co.in

Which subject is more important? Or from where should you start?

First check my question set and calculate the number of questions asked. The subject from which most
of the questions were asked is more important and the chapter from which more number of questions
were asked is more important.

1. Strength of Material

Prepare with my notes only. You don’t need any other books for this subject. First understand the theory which is given at the starting of the chapter. And then try to solve my question set with your own and check with my explanations.

2. Industrial Engineering

Prepare with my notes only. You don’t need any other
books for this subject. First understand the
theory which is given at the starting of the chapter. And
then try to solve my question set with your own and check with my explanations.

3. Fluid mechanics and Fluid Machines

Prepare with my notes only. You don’t need any other
books for this subject. First understand the
theory which is given at the starting of the chapter. And
then try to solve my question set with your own and check with my explanations.

S K Mondal Contact: swapan_mondal_01@yahoo.co.in

4. Production Engineering
(Manufacturing)

Concentrate on questions and answers. Prepare with my
notes and with one other book. If you are familiar with any books buy the book but my suggestion is P.N. Rao (2 volumes).

First understand the theory from book. And then try to solve my question set with your own and check with my explanations. First prepare the chapter from which more
number of questions was asked.

5. Theory of Machine

Prepare with my notes and with one other book. If you are
familiar with any books buy the book but
my suggestion is Khurmi+Gupta.

First understand the
theory from book. And then try to solve my
question set with your own and check with my
explanations. First prepare the chapter from which more
number of questions was asked.

6. Material Science
Concentrate on questions and answers. Prepare with my
notes and with one other book. If you are familiar with any books buy the book but my suggestion is
Hazra+Chaudhry. First understand the theory from book. And then try to solve my question set with your own and check with my explanations. First prepare the chapter from which more number of questions was asked.

7. Basic thermodynamics

Prepare with my notes and with one other book. If you are
familiar with any books buy the book but
my suggestion is P.K. Nag. First understand the theory
from book. And then try to solve my question
set with your own and check with my explanations. First
prepare the chapter from which more number
of questions was asked.

S K Mondal Contact: swapan_mondal_01@yahoo.co.in

8. Heat Transfer

Prepare with my notes and with one other book. If you are
familiar with any books buy the book but
my suggestion is R.K. Rajput. First understand the theory
from book. And then try to solve my
question set with your own and check with my
explanations. First prepare the chapter from which more
number of questions was asked.
Very important chapters
• Basic concepts ( 1D conduction)
• Unsteady conduction (Lump heat capacity)
• Radiation
• Heat exchangers

9. R.A.C (Refrigeration and Air
conditioning)

Prepare with my notes and with one other book. If you are
familiar with any books buy the book but
my suggestion is C.P. Arora. First understand the theory
from book. And then try to solve my
question set with your own and check with my
explanations. First prepare the chapter from which more
number of questions was asked.
Very important chapters
• Vapour refrigeration cycle
• Psychometrics
• Psychometric process

S K Mondal Contact: swapan_mondal_01@yahoo.co.in

10.I.C Engine
Prepare with my notes and with one other book. If you are
familiar with any books buy the book but my suggestion is Sharma+Mathur.

First understand the theory from book. And then try to solve my question set with your own and check with my explanations. First prepare the chapter from which more number of questions was asked.

It is very less important subject. Just prepare the following
topic
• Difference between CI & SI engine
• abnormal combustion
• detonation and its control
• Fuel rating ( Octane and cetane rating)
• Supercharging
• Carburetor
• Performance and testing
• Pollution control

11. Power Plant Engineering

Prepare with my notes and with one other book. If you are familiar with any books buy the book but my suggestion is P.K. Nag. First understand the theory from book. And then try to solve my question
set with your own and check with my explanations.
First prepare the chapter from which more number of questions was asked. From this book just study some chapters
• analysis of steam power cycle
• boiler
• turbine

First understand the theory from book. And then try to solve my
question set with your own and check with my explanations.

First prepare the chapter from which more number of questions was asked.

Strategy
how to prepare for IES???????????

Don’t think it is too hard. It is [b]not easy[/b] as well as [b]
not hard[/b]. All it needs
some serious preparation.

1st buy Previous year’s papers (New Vishal Publication)

2nd buy books from booklist I had given in this thread for your branch.

3rd try to solve Previous year’s papers with your own with
the help of books. Mark with a
pencil in your books which funda is needed to solve this
problems.

Remember questions will not repeat but that funda will have have repeated. so try to understand that funda not question answer. after 6 months you will be confident to
crack IES.

take help from. http://nptel.iitm.ac.in /

Self study is the best study. Coaching only reduce your
preparation time. By giving the
exam 2 - 3 times you will gain experience and final
selection. Coaching will reduce your
time. By self study you will definitely make some mistake
in the total process and you
will learn from your own mistake but in coaching there are
many faculties they will guide
you so that in total process you will not make silly
mistake.

Subject Priority list for IES only
1. Fluid Mechanics
2. Thermodynamics
3. RAC
4. Heat Transfer
5. Power plant (With nuclear power)
6. SOM
7. TOM
8. Manufacturing
9. Industrial Engineering
10. Design
11. IC Engine
12. Engineering materials
13. Computer related.

Subject Priority list for GATE only
1. SOM
2. TOM
3. Math
4. Industrial Engineering
5. Manufacturing
6. Design
7. Fluid Mechanics
8. Heat Transfer
9. Thermodynamics
10. RAC
11. IC Engine
12. Power plant (With nuclear power)
13. Engineering materials
14. Computer related.

How To Prepare For GATE, IES, PSU by S.K. Mondel?

How to prepare for PSU using my notes?

Please follow the step by step procedure given below for preparing PSU where only objective type
questions are asked.
General guidelines

I found that in all competitive examinations similar type of questions are asked. They are alike but not the same. The questions are not repeated but the theory (Funda) which needed to solve the question remains same. So you don’t need to remember the questions and answers but you must remember the funda behind it. Previously it was not like that. Because that time the question paper was set by PSU people. Most of the questions were copied from the book of R.K. Jain. Now every PSU papers are set by Professors of IITs or renowned Institutes. Professors don’t copy questions but they check student’s fundamentals of the subject. So we must be prepared with fundamentals. That’s why funda is repeated.

You know that in the engineering books are not made for objective type questions. The theory involves rigorous derivations, enormous calculations etc and our University examination is also conventional type. We have to prepare for Objective Questions. For that first read the book carefully try to solve my question set with your own and check with my explanations. Mark with a pencil in your books which funda is needed to solve this problems.

For clearing doubts or any time if you have any confusion Open a PDF file from the folder “Search for solving Question” and press key Shift+Ctrl+F then type any keyword and search. Use down arrow key in the result.
Doing this 99% confusion will be clear. If confusion is not clear yet call me or mail me.

S K Mondal Contact: swapan_mondal_01@yahoo.co.in

Which subject is more important? Or from where should you start?

First check my question set and calculate the number of questions asked. The subject from which most of the questions were asked is more important and the chapter from which more number of questions were asked is more important.

1. Strength of Material

2. Industrial Engineering

3. Fluid mechanics and Fluid Machines

4. Production Engineering (Manufacturing)

Concentrate on questions and answers. Prepare with my notes and with one other book. If you are familiar with any books buy the book but my suggestion is P.N. Rao (2 volumes).

First understand the theory from book. And then try to solve my question set with your own and check with my explanations. First prepare the chapter from which more number of questions was asked.

5. Theory of Machine

Prepare with my notes and with one other book. If you are familiar with any books buy the book but
my suggestion is Khurmi+Gupta. First understand the theory from book. And then try to solve my question set with your own and check with my explanations. First prepare the chapter from which ore number of questions was asked.

6. Material Science
Concentrate on questions and answers. Prepare with my notes and with one other book. If you are familiar with any books buy the book but my suggestion is Hazra+Chaudhry. First understand the theory from book. And then try to solve my question set with your own and check with my explanations. First prepare the chapter from which more number of questions was asked.

7. Basic thermodynamics

Prepare with my notes and with one other book. If you are familiar with any books buy the book but my suggestion is P.K. Nag. First understand the theory from book. And then try to solve my question set with your own and check with my explanations. First prepare the chapter from which more number of questions was asked. S K Mondal Contact: swapan_mondal_01@yahoo.co.in

8. Heat Transfer

Prepare with my notes and with one other book. If you are familiar with any books buy the book but my suggestion is R.K. Rajput. First understand the theory from book. And then try to solve my question set with your own and check with my explanations. First prepare the chapter from which more number of questions was asked.
Very important chapters
• Basic concepts ( 1D conduction)
• Unsteady conduction (Lump heat capacity)
• Radiation
• Heat exchangers

9. R.A.C (Refrigeration and Air conditioning)

Prepare with my notes and with one other book. If you are familiar with any books buy the book but my suggestion is C.P. Arora. First understand the theory from book. And then try to solve my question set with your own and check with my explanations. First prepare the chapter from which more number of questions was asked. Very important chapters
• Vapour refrigeration cycle
• Psychometrics
• Psychometric process

S K Mondal Contact: swapan_mondal_01@yahoo.co.in

10.I.C Engine
Prepare with my notes and with one other book. If you are familiar with any books buy the book but my suggestion is Sharma+Mathur. First understand the theory from book. And then try to solve my question set with your own and check with my explanations. First prepare the chapter from which more number of questions was asked. It is very less important subject. Just prepare the following topic
• Difference between CI & SI engine
• abnormal combustion
• detonation and its control
• Fuel rating ( Octane and cetane rating)
• Supercharging
• Carburetor
• Performance and testing
• Pollution control

11. Power Plant Engineering

Prepare with my notes and with one other book. If you are familiar with any books buy the book but my suggestion is P.K. Nag. First understand the theory from book. And then try to solve my question
set with your own and check with my explanations.
First prepare the chapter from which more number of questions was asked. From this book just study some chapters
• analysis of steam power cycle
• boiler
• turbine

S K Mondal Contact: swapan_mondal_01@yahoo.co.in
12. Machine Design
Prepare with my notes and with one other book. If you are familiar with any books buy the book but my suggestion is Khurmi+Gupta. First understand the theory from book. And then try to solve my question set with your own and check with my explanations. First prepare the chapter from which more number of questions was asked.

Strategy
how to prepare for IES???????????

Don’t think it is too hard. It is not easy as well as not hard. All it needs some serious preparation.

1st buy Previous year’s papers (New Vishal Publication)

2nd buy books from booklist I had given in this thread for your branch.

3rd try to solve Previous year’s papers with your own with the help of books.
Mark with a pencil in your books which funda is needed to solve this problems. Remember questions will not repeat but that funda will have have repeated. so try to understand that funda not question answer. after 6 months you will be confident to crack IES.

take help from. http://nptel.iitm.ac.in /

Self study is the best study. Coaching only reduce your preparation time. By giving the exam 2 - 3 times you will gain experience and final selection. Coaching will reduce your time. By self study you will definitely make some mistake in the total process and you will learn from your own mistake but in coaching there are many faculties they will guide you so that in total process you will not make silly mistake.

Friday, 9 January 2015

Monday, 17 November 2014

Top 10 Most Amazing Elements

It’s hard to think of elements being, of all things, ‘cool’, but the basic building blocks of every thing that has come into common use in the world is comprised of the elements. From the very air we breathe (oxygen, nitrogen, and other trace gases) to simple medications we take (comprised of many things including calcium, magnesium, copper, potassium), all are found, or in a few cases, created, here on Earth. Though many of the elements found in gaseous forms can be considered toxic, many in liquid and solid forms can be equally as deadly: argon, gallium, and chlorine to name just a few. There are many that stand out because of their use, visible state, or exceptionally short life spans. Here are but ten (and, of course, a cool bonus).

10. Mercury – Hg

Mercury also called quicksilver, is an element that has the symbol Hg (Greek: hydrargyrum, meaning watery or liquid silver) with an atomic number of 80. A heavy, silvery metal, mercury is one of the elements that are liquid at or near room temperature. Mercury is used in thermometers, barometers and other scientific apparatus, though many concerns about the element’s toxicity have led to said thermometers being largely phased out in favor of alcohol-filled or digital. It remains in use in scientific study and research applications, and in dentistry. Mercury is mostly obtained by reduction from cinnabar, a mineral. Mercury occurs in deposits throughout the world and it is harmless in an insoluble form, such as mercuric sulfide, but it is poisonous in soluble forms such as mercuric chloride or methylmercury. Watch the video clip above for great footage of mercury vapor.

9. Magnesium – Mg

Magnesium is the eighth most abundant element in the earth’s crust, though not found in nature in its
elemental form. It is a Group 2 element, called an alkaline earth metal. Magnesium tarnishes slightly in air, and finely divided magnesium readily ignites upon heating in air and burns with a dazzling white flame. Normally magnesium is coated with a layer of oxide that protects magnesium from air and water. Magnesium is needed for more than 300 biochemical reactions in the body. It helps maintain regular muscle and nerve function, keeps heart rhythm steady, supports a healthy immune system, and keeps bones strong. Magnesium also helps regulate blood sugar levels, promotes normal blood pressure, and is known to be involved in energy metabolism and the synthesis of protein.

8. Krypton – Kr

Krypton is present in the air at about 1 parts per million. The atmosphere of Mars contains a little (about 0.3 ppm) of krypton. It is characterized by its brilliant green and orange spectral lines. Under normal conditions krypton is colorless, odorless, fairly expensive gas. Solid krypton is a white crystalline substance with a face-centered cubic structure, which is common to all the “rare gases”. In 1960 an international agreement changed the definition of the meter in terms of wavelengths of light emitted by the krypton-86 isotope. This agreement replaced the much-older standard ‘meter’ located in Paris which was a metal bar made of a platinum alloy (the bar was originally estimated to be one ten millionth of a quadrant of the Earth’s polar circumference). Many window companies now use Krypton to fill sealed panes in order to reduce energy waste, and the gas can also be used to detect leaks in industrial sealed containers.

7. Curium – Cm

Named for famed physicist Marie Curie, curium is made by bombarding plutonium with helium ions. So radioactive it glows in the dark. Several kilograms of curium are produced each year. As curium is
only available in extremely limited quantities, it has few uses; however, it was used on a Mars mission as an alpha particle source for the Alpha Proton X- Ray Spectrometer. Curium is potential isotopes power source as it releases three watts of heat energy per gram gram. Most normal individuals will never normally encounter curium as it does not occur in nature and is only produced in limited quantities. Louis Werner and Isadore Perlman created a visible sample of curium-242 hydroxide at the University of California in 1947 by bombarding americium-241 with neutrons.

6. Strontium – Sr

Strontium is found chiefly as celestite and strontianite. The metal can be prepared by electrolysis of the fused chloride mixed with potassium chloride, or is made by reducing strontium oxide with aluminum in a vacuum at a temperature at which strontium dissolves off. Strontium is softer than calcium and decomposes in water more vigorously. It does not absorb nitrogen below 380oC. It should be kept under kerosene to prevent oxidation. Freshly cut strontium has a silvery appearance, but rapidly turns a yellowish color with the formation of the oxide. The finely divided metal ignites spontaneously in air. Volatile strontium salts impart a beautiful crimson color to flames, and these salts are used in pyrotechnics and in the production of flares. Natural strontium is a mixture of four stable isotopes. The primary use for strontium compounds is in glass for color television cathode ray tubes to prevent X-ray emission. If you want to see a future rocket scientist having a play with Strontium, here you go .

5. Lutetium – Lu

In 1907 Georges Urbain was credited with the discovery of the element and won the right to name them, although chemists later changed the spelling of lutecium to lutetium. Today, lutetium is primarily obtained through an ion exchange process from monazite sand ((Ce, La, Th, Nd, Y)PO4), a material rich in rare earth elements. Lutetium is one of the most difficult elements to prepare and has no large scale practical uses, although some of its radioactive isotopes can be used as a catalyst in
the cracking of petroleum products and a catalyst in some hydrogenation and polymerization processes. Lutetium-176 has been used to date the age of meteorites. Lutetium Aluminum Garnet has been proposed for use as a lens material in high refractive lithography.

4. Chlorine – Cl

We all know never to mix chlorine with ammonia, right? Well, besides that potentially devastating fact, chlorine is widely used in making many everyday products. It is used for producing safe drinkingwater the world over. Even the smallest water supplies are now usually chlorinated. It is also
extensively used in the production of paper products, dyes, textiles, petroleum products, medicines, antiseptics, insecticides, food, solvents, paints, plastics, and many other consumer products. Most of the chlorine produced is used in the manufacture of chlorinated compounds for sanitation, pulp bleaching, disinfectants, and textile processing. Further use is in the manufacture of chlorates, chloroform, carbon tetrachloride, and in the extraction of bromine. Organic chemistry demands much from chlorine, both as an oxidizing agent and in substitution, since it often brings many desired properties in an organic compound when substituted for hydrogen, as in one form of synthetic rubber.

3. Aluminum – Al

Remember the boom of aluminum siding back in the day? Well this stuff has thousand-and-one uses from soda cans to kitchen utensils, outside building decoration, and in thousands of industrial applications where a strong, light, easily constructed material is needed. Although it’s electrical conductivity is only about 60% that of copper, it is used in electrical transmission lines because of its lightweight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese or other elements impart a variety of useful properties. These alloys are of vital importance in the construction of modern aircraft and rockets. Aluminum, evaporated in a vacuum, forms a highly reflective coating for both visible light and radiant heat. These coatings soon form a thin layer of the protective oxide and do not deteriorate as do silver coatings. They are used to coat telescope mirrors and to make decorative paper, packages, and toys.

2. Zirconium – Zr

It is used extensively by the chemical industry where corrosive agents are employed. Zirconium is used in vacuum tubes, as an alloying agent in steel, in surgical appliances, photoflash bulbs, explosive primers, rayon spinnerets, lamp filaments, etc. It is used in poison ivy lotions in the form of the carbonate as it combines with urushiol. With niobium, zirconium is super-conductive at low temperatures and is used to make super- conductive magnets, which offer hope of direct large-scale generation of electric power. Zirconium oxide (zircon) has a high index of refraction and is used as a gem material. The impure oxide, zirconia, is used for laboratory crucibles that can withstand heat shock, for linings of metallurgical furnaces, and by the glass and ceramic industries as a refractory material. Its use as a refractory material accounts for a large share of all zirconium consumed.

1. Elements 112-118 Ununbium, Ununtrium, Ununquadium, Ununpentium, Ununhexium, Ununseptium, Ununoxium

Relatively new to the Periodic Table (they weren’t even heard of when I was in High School), elements 112-118. They are completely man made by bombarding specific atoms of one element with
specific atoms of another thereby separating each into an entirely new element only stable (though not necessarily visible) for a fraction of a fraction of a second. Ununbium was first created on Feb. 9th, 1996 in a lab in Germany. This element was created by fusing a zinc -70 nucleus with a lead-208 nucleus by accelerating zinc nuclei into a lead target in a heavy ion accelerator. The two ununbium nuclei so produced had a mass number of 27. On Feb. 1, 2004 the discovery of ununtrium and ununpentium were reported by a team composed of Russian scientists and an American scientist at the Lawrence Livermore National Academy. Most of the others were created or discovered much in the same fashion in different parts of the world since then. As of yet, since none of these have been witnessed for more than a second, their inclusion remains suspect and under investigation.

Wednesday, 29 October 2014

180 TOP Production Technology - Mechanical Engineering Multiple choice Questions and Answers

Latest Production Technology Questions and Answers List

1. Work study is concerned with
(a) improving present method and finding
standard time
(b) motivation of workers
(c) improving production capability
(d) improving production planning and control
(e) all of the above.
Ans: a
2. Basic tool in work study is
(a) graph paper
(b) process chart
(c) planning chart
(d) stop watch
(e) analytical mind.
Ans: d
3. What does symbol 'O' imply in work study
(a) operation
(b) inspection
(c) transport
(d) delay/temporary storage
(e) none of the above.
Ans: a
4. What does symbol 'D' imply in work study
(a) inspection
(b) transport
(c) delay/temporary storage
(d) permanent storage
(e) none of the above.
Ans: c
5. What does symbol 'V' employ in work study
(a) operation
(b) inspection
(c) delay/ temporary Storage
(d) permanent storage
(e) none of the above.
Ans: d
6. Material handling in automobile industry is done
by
(a) overhead crane
(b) trolley
(c) belt conveyor
(d) all of the above
(e) none of the above.
Ans: a
7. String diagram is used when
(a) team of workers is working at a place
(b) material handling is to be done
(c) idle time is to be reduced
(d) all of the above
(e) none of the above.
Ans: a
8. Work study is most useful
(a) where production activities are involved
(b) in judging the rating of machines
(c) in improving industrial relations
(d) in judging the output of a man and improving it
(e) where men are biggest contributor to success
of a project.
Ans: a
9. Micromotion study is
(a) enlarged view of motion study
(b) analysis of one stage of motion study
(c) minute and detailed motion study
(d) subdivision of an operation into therbligs and
their analysis
(e) motion study of small components upto mirco-
seconds.
Ans: d
10. In micromotion study, therblig is described by
(a) a symbol
(b) an event
(c) an activity
(d) micro motions
(e) standard symbol and colour.
Ans: e
11. The allowed time for a job equals standard time
plus
(a) policy allowance
(b) interference allowance
(c) process allowance
(d) learning allowance
(e) unforeseen allowance.
Ans: a
12. Micromotion study involves following number of
fundamental hand motions
(a) 8
(b) 12
(c) 16
(d) 20
(e) 24
Ans: c
13. The standard time for a job is
(a) total work content
(b) base time + relaxation time
(c) total work content + basic time
(d) total work content + delay contingency
allowance
(e) total work content + relaxation time.
Ans: d
14. Work study is done with the help of
(a) process chart
(b) material handling
(c) stop watch
(d) all of the above
(e) none of the above.
Ans: c
15. Scheduling gives information about
(a) when work should start and how much work
should be completed during a certain period
(b) when work should complete
(c) that how idle time can be minimized
(d) proper utilisation of machines
(e) none of the above.
Ans: a
16. Expediting function consists in keeping a watch
on
(a) operator's activity
(b) flow of material and in case of trouble locate
source of trouble
(c) minimising the delays
(d) making efficient despatching
(e) none of the above.
Ans: b
17. Choose the wrong statement Time study is
used to
(a) determine overhead expenses
(b) provide a basis for setting piece prices or
incentive wages
(c) determine standard costs
(d) determine the capability of an operator to
handle the number of machines
(e) compare alternative methods.
Ans: a
18. Job evaluation is the method-of determining
the
(a) relative worth of jobs
(b) skills required by a worker
(c) contribution of a worker
(d) contribution of a job
(e) effectiveness of various alternatives.
Ans: a
19. Micromotion study is
(a) analysis of a man-work method by using a
motion picture camera with a timing device in the
field of view
(b) motion study* observed on enhanced time
intervals
(c) motion study of a sequence of operations
conducted systematically
(d) study of man and machine conducted
simultaneously
(e) scientific, analytically procedure for
determining optimum work method.
Ans: a
20. Per cent idle time for men or machines is found
by
(a) work sampling
(b) time study
(c) method study
(d) work study
(e) ABC analysis.
Ans: a
21. TMU in method time measurement stands for
(a) time motion unit
(b) time measurement unit
(c) time movement unit
(d) technique measurement unit
(e) time method unit.
Ans: b
22. Time study is
(a) the appraisal, in terms of time, of the value of
work involving human effort
(b) machine setting time
(c) time taken by workers to do a job
(d) method of fixing time for workers
(e) method of determining the personnel
Requirement.
Ans: a
23. Work sampling observations are taken on the
basis of
(a) detailed calculations
(b) convenience
(c) table of random numbers
(d) past experience
(e) fixed percentage of daily production.
Ans: c
24. One time measurement unit (TMU) in method
time measurement system equals
(a) 0.0001 minute
(b) 0.0006 minute
(c) 0.006 minute
(d) 0.001 minute
(e) 0.06 minute.
Ans: b
25. Basic motion time study gives times for basic
motions in ten thousandths of
(a) second
(b) minute
(c) hour
(d) day
(e) none of the above.
Ans: b
26. Choose the wrong statement. Motion study is
used for
(a) improving a work method
(b) improvising a work method
(c) designing a work method
(d) providing a schematic framework
(e) reducing inventory costs.
Ans: e
27. Gnatt chart provides information about the
(a) material handling
(b) proper utilisation of manpower
(c) production schedule
(d) efficient working of machine
(e) all of the above.
Ans: c
28. ABC analysis deals with
(a) analysis of process chart
(b) flow of material
(c) ordering schedule of job
(d) controlling inventory costs money
(e) all of the above.
Ans: d
29. Process layout is employed for
(a) batch production
(b) continuous type of product
(c) effective utilisation of machines
(d) all of the above
(e) none of the above.
Ans: a
30. For a product layout the material handling
equipment must
(a) have full flexibility
(b) employ conveyor belts, trucks, tractors etc.
(c) be a general purpose type
(d) be designed as special purpose for a particular
application
(e) arranging shops according to specialization of
duties.
Ans: d
31. Travel charts provide
(a) an idea of the flow of materials at various
stages
(b) a compact estimate of the handling which must
be done between various work sections
(c) the information for changes required in
rearranging material handling equipment
(d) an approximate estimate of the handling which
must be done at a particular station
(g) solution to handling techniques to achieve
most optimum^ results.
Ans: b
32. Product layout is employed for
(a) batch production
(b) continuous production
(c) effective utilization of machine
(d) all of the above
(e) none of the above.
Ans: b
33. The most important objective behind plant
layout is
(a) overall simplification, safety of integration
(b) economy in space
(c) maximum travel time in plant
(d) to provide conveniently located shops
(e) to avoid any bottlenecks.
Ans: a
34. The process layout is best suited where
(a) specialisation exists
(b) machines are arranged according to sequence
of operation
(c) few number of non-standardised units are to be
produced
(d) mass production is envisaged
(e) bought out items are more.
Ans: c
35. A low unit cost can be obtained by following
(a) product layout
(b) functional layout
(c) automatic material handling equipment
(d) specialisation of operation
(e) minimum travel time plan and com¬pact layout.
Ans: a
36. Military organisation is known as
(a) line organisation
(b) line and staff organisation
(c) functional organisation
(d) all of the above
(e) none of the above.
Ans: a
37. The main disadvantage of line organisation is
(a) top level executives have to do excessive work
(b) structure is rigid
(c) communication delays occur
(d) all of the above
(e) none of the above.
Ans: d
38. The main advantage of line organisation is its
(a) effective command and control
(b) defined responsibilities at all levels
(c) rigid discipline in the organisation
(d) ability of quick decision at all levels
(e) all of the above.
Ans: e
39. Frederick W. Taylor introduced a system of
working known as
(a) line organisation
(b) line and staff organisation
(c) functional organisation
(d) effective organisation
(e) none of the above.
Ans: c
40. The salient feature of functional organisation is
(a) strict adherence to specification
(b) separation of planning and design part
(c) each individual maintains functional efficiency
(d) work is properly planned and distributed
(e) all of the above.
Ans: e
41. The most popular type of organisation used for
Civil Engineering Constructions is
(a) line organisation
(b) line and staff organisation
(c) functional organisation
(d) effective organisation
(e) none of the above.
Ans: a
42. Templates are used for
(a) a planning layout
(b) flow of material
(c) advancing a programme in automatic machines
(d) copying complicated profiles
(e) none of the above.
Ans: a
43. In steel plant the most important system for
materials handling is
(a) conveyors
(b) cranes and hoists
(c) trucks
(d) locos
(e) none of the above.
Ans: d
44. Routing prescribes the
(a) flow of material in the plant
(b) proper utilization of man power
(c) proper utilization of machines
(d) inspection of final product
(e) none of the above.
Ans: a
45. Queuing theory deals with problems of
(a) material handling
(b) reducing the waiting time or idle Jajme
(c) better utilization of man services
(d) effective use of machines
(e) none of the above.
Ans: b
46. Standard time is defined as
(a) normal time + allowances
(b) normal time + idle time + allowances
(c) normal time + idle time
(d) only normal time for an operation
(e) none of the above.
Ans: a
47. Father of industrial engineering is
(a) Jeck Gilberth
(b) Gnatt
(c) Taylor
(d) Newton
(e) none of the above.
Ans: b
48. The grouping of activities into organisational
units is called
(a) corporate plans
(b) higher level management
(c) functional authority
(d) departmentatidn
(e) company policy.
Ans: d
49. Which of the following organisation is preferred
in automobile industry
(a) functional organisation
(b) line organisation
(c) staff organisation
(d) line and staff organisations
(e) scalar organisation.
Ans: d
50. Which of the following organisations is best
suited for steel plants
(a) functional organisation
(b) line organisation
(c) staff organisation
(d) line, staff and functional organisations
(e) scalar organisation.
Ans: d
51. The wastage of material in the store is taken
into account by the following method in the
evaluation of the material issued from the store
(a) inflated system
(b) primary cost method
(c) current value method
(d) fixed price method
(e) variable price method.
Ans: a
52. Which of the following is independent of sales
forecast
(a) productivity
(b) inventory control
(c) production planning
(d) production control
(e) capital budgeting.
Ans: a
53. Gnatt charts are used for
(a) forecasting sales
(b) production schedule
(c) scheduling and routing
(d) linear programming
(e) none of the above.
Ans: b
54. Inventory management consists of
(a) effective running of stores
(b) state of merchandise methods of stroing and
maintenance etc.
(c) stock control system
(d) all of the above
(e) none of the above.
Ans: d
55. Gnatt charts provide information about
(a) break even point analysis
(b) production schedule
(c) material handling layout
(d) determining selling price
(e) value analysis.
Ans: b
56. Inventory control in production, planning and
control aims at
(a) achieving optimisation
(b) ensuring against market fluctuations
(c) acceptable customer service at low capital
investment in inventory
(d) discounts allowed in bulk purchase
(e) regulate supply and demand.
Ans: c
57. In inventory control, the economic order
quantity is the
(a) optimum lot size
(b) highest level of inventory
(c) lot corresponding to break-even point
(d) capability of a plant to produce
(e) none of the above.
Ans: a
58. Statistical quality control techniques are based
on the theory of
(a) quality
(b) statistics
(c) probability
(d) all of the above
(e) none of the above.
Ans: c
59. The appellate authority for an industrial dispute
is
(a) management
(b) labour court
(c) high court/supreme court
(d) board of directors
(e) president.
Ans: c
60. Under the Apprenticeship Act
(a) all industries have to necessarily train the
apprentices
(b) industries have to train apprentices ac-cording
to their requirement
(c) all industries employing more than 100 workers
have to recruit apprentices
(d) only industries employing more than 500
workers have to recruit apprentices
(e) all industries other than small scale industries
have to train apprentices.
Ans: d
61. Standing orders which are statutory are
applicable to
(a) all industries
(b) all process industries and thermal power plants
(c) only major industries
(d) only key industries
(e) all industries employing more than 100
workers.
Ans: e
62. Acceptance sampling is widely used in
(a) batch production
(b) job production
(c) mass production
(d) all of the above
(e) none of the above.
Ans: c
63. The technique of value analysis can be applied
to
(a) complicated items only
(b) simple items only
(c) crash programmer items only
(d) cost consciousness items only
(e) any item.
Ans: e
64. The term 'value' in value engineering refers to
(a) total cost of the product
(b) selling price of the product
(c) utility of the product
(d) manufactured cost of the product
(e) depreciation value.
Ans: c
65. Value engineering aims at finding out the
(a) depreciation value of a product
(b) resale value of a product
(c) major function of the item and accomplishing
the same at least cost without change in quality
(d) break even point when machine re-quires
change
(e) selling price of an item.
Ans: c
66. In the perpetual inventory control, the material
is checked when it reaches its
(a) minimum value
(b) maximum value
(c) average value
(d) alarming value
(e) original value.
Ans: a
67. According to MAPI formula, the old machine
should be replaced by new one when
(a) CAM < DAM
(b) CAM > DAM
(c) CAM = DAM
(d) there is no such criterion
(e) none of the above.
(CAM = Challenger's Adverse minimum DAM =
Defender's Adverse minimum)
Ans: a
68. Merit Rating is the method of determining worth
of
(a) a job
(b) an individual employee
(c) a particular division in workshop
(d) machine
(e) overall quality.
Ans: b
69. Material handling and plant location is analysed
by
(a) Gnatt chart
(b) bin chart
(c) Emerson chart
(d) travel chart
(e) activity chart.
Ans: d
70. Works cost implies
(a) primary cost
(b) factory cost
(c) factory expenses
(d) primary cost + factory expenses
(e) none of the above.
Ans: d
71. Motion study involves analysis of
(a) actions of operator
(b) layout of work place
(c) tooling and equipment
(d) all of the above
(e) none of the above.
Ans: a
72. Standard time as compared to normal time is
(a) greater
(b) smaller
(c) equal
(d) there is no such correlation
(e) none of the above.
Ans: a
73. Pick up the incorrect statement about
advantages of work sampling
(a) permits a fine breakdown of activities and
delays
(b) simultaneous study of many operators may be
made by a single observer
(c) calculations are easier, method is economical
and less time consuming
(d) no time measuring devices are generally
needed
(e) as operators are not watched for long
periods, chances of obtaining misleading results
are less.
Ans: a
74. In which of the following layouts, the lines need
to the balanced
(a) process layout
(b) product layout
(c) fixed position layout
(d) plant layout
(e) functional layout.
Ans: b
75. Which of the following layouts is suited for
mass production
(a) process layout
(b) product layout
(c) fixed position layout
(d) plant layout
(e) functional layout.
Ans: b
76. Which of the following layouts is suited to job
production
(a) process layout
(b) product layout
(c) fixed position layout
(d) plant layout
(e) functional layout.
Ans: a
77. The employees provident fund act is applicable
to
(a) all industries
(b) all industries other than small and medium
industries
(c) volunteers
(d) the industries notified by Government
(e) all major industries.
Ans: d
78. The amount deducted from the salary of
workers towards employees provident fund is
(a) credited into reserves of company
(b) deposited in nationalised bank
(c) deposited in post office
(d) deposited in the account of worker with
employer or Reserve Bank of India
(e) deposited in the account of worker with
Provident Fund Commissioner.
Ans: e
79. The deductions for, employees provident fund
start
(a) immediately on joining the service
(b) after 60 days of joining the service
(c) after 100 days of joining the service
(d) after 240 days of joining the service
(e) after one year of joining the service.
Ans: d
80. Father of time study was
(a) F.W. Taylor
(b) H.L. Gantt
(c) F.B. Gilberfh
(d) R.M. Barnes
(e) H.B. Maynord.
Ans: a
81. Tick the odd man out
(a) Taylor
(b) Drucker
(c) McGregor
(d) Galileo
(e) Parkinson.
Ans: d
82. Current assets include
(a) manufacturing plant
(b) manufacturing plant and equipment
(c) inventories
(d) common stock held by the firm
(e) all of the above.
Ans: a
83. The objective of time study is to determine the
time required to complete a job by
(a) fast worker
(b) average worker
(c) slow worker
(d) new entrant
(e) any one of the above.
Ans: b
84. Job enrichment technique is applied to
(a) reduce labour monotony
(b) overcome boring and demotivating work
(c) make people happy
(d) all of the above
(e) none of the above.
Ans: d
85. For ship vessel industry the following layout is
best suited
(a) process layout
(b) product layout
(c) fixed position layout
(d) plant layout
(e) functional layout.
Ans: c
86. In Halsey 50-50 plan, output standards are
established
(a) by time study
(b) from previous production records
(c) from one's judgement
(d) all of the above
(e) none of the above.
Ans: b
87. Routing is essential in the following type of
industry
(a) assembly industry
(b) process industry
(c) job order industry
(d) mass production industry
(e) steel industry.
Ans: a
88. An optimum project schedule implies
(a) optimum utilization of men, machines and
materials
(b) lowest possible cost and shortest possible time
for project
(c) timely execution of project
(d) to produce best results under given constraints
(e) realistic execution time, minimum cost and
maximum profits.
Ans: b
89. Graphical method, simplex method, and
transportation method are concerned with
(a) break-even analysis
(b) value analysis
(c) linear programming
(d) queing theory
(e) tnaterial handling.
Ans: c
90. Which one of the following represents a group
incentive plan ?
(a) Scanlon Plan
(b) Rowan Plan
(c) Bedaux Plan
(d) Taylor Differential Piece Rate System
(e) Halsey Premium Plan.
Ans: a
91. In the Halsey 50-50 plan, the following are
rewarded more
(a) past good workers
(b) past poor workers
(c) past average workers
(d) all of the above
(e) none of the above.
Ans: b
92. In the Halsey system of wage incentive plan, a
worker is
(a) paid as per efficiency
(b) ensured of minimum wages
(c) not paid any bonus till his efficiency
(d) never a loser
(e) induced to do more work.
Ans: b
93. 'Value' for value engineering and analysis
purposes is defined as
(a) purchase value
(b) saleable value
(c) depreciated value
(d) present worth
(e) function/cost.
Ans: e
94. Break-even analysis can be used for
(a) short run analysis
(b) long run analysis
(c) average of above two run analysis
(d) there is no such criterion
(e) none of the above.
Ans: a
95. CPM has following time estimate
(a) one time estimate
(b) two time estimate
(c) three time estimate
(d) four time estimate
(e) nil time estimate.
Ans: a
96. PERT has following time estimate
(a) one time estimate
(b) two time estimate
(c) three time estimate
(d) four time estimate
(e) nil time estimate.
Ans: c
97. In Lincoln plan (one type of group incentive
plan), the amount of the profit which an .employee
receives in addition to the guaranteed basic pay/
wages, is based on :
(a) a standard rating system
(b) a merit rating system
(c) a job evaluation system
(d) his individual performance
(e) all of the above.
Ans: b
98. Which of the following incentive plansrensures
a part of the swing to the worker and rest to the
employer
(a) Emerson efficiency plan
(b) Taylor plan
(c) Halsey premium plan
(e) Gilberth plan.
Ans: c
99. Which of the following is not wage incentive
plan
(a) differential piece rate system
(b) Rowan plan
(c) Emerson plan
(d) Taylor plan
(e) Halsey plan.
Ans: d
100. Which of the following plans motivates
supervisors by paying a premium on time saved by
workers
(a) Halsey plan
(b) Rowan plan
(c) Haynes plan
(d) Emerson's plan
(e) Taylor's plan.
Ans: c
101. The time required to complete a task is
established and a bonus is paid to the worker for
every hour he saves from the established time
required. This type of incentive plan is known as
(a) Rowan Plan
(b) Bedaux Plan
(c) Taylor Differential Piece rate system
(d) Halsey Premium plan
(e) Day work plan.
Ans: d
102. One of the basic essentials of an incentive
plan is that
(a) a differential piece rate system should exist
(b) minimum wages should be guaranteed
(c) provide incentive to group efficiency
performance
(d) all standards should be based on optimum
standards of production
(e) all standards should be based on time studies.
Ans: e
103. In the Emerson efficiency plan, a worker
receives only his daily wage and no bonus is paid
till his efficiency reaches
(a) 50%
(b) 661%
(c) 75%
(d) 80%
(e) 90%.
Ans: b
104. According to Rowan plan, if H = hourly rate, A
= actual time and S = standard time, then wages
will be
(a) HA
(b) HA + (S~A) HA
(c) HA + ^^-H
(d) HA + ^^-H
(e) HA + ^^-HA.
Ans: b
105. If a worker gets a daily wage of Rs HA, then
according to Rowan plan, his maximum daily
earnings can be
(a) 2 HA
(b) 1.33 HA
(c) 1.5 HA
(d) 1.15 HA
(e) 2.5 HA.
Ans: a
106. In A-B-C control policy, maximum attention is
given to
(a) those items which consume money
(b) those items which are not readily available
(c) those x items which are in more demand
(d) those items which consume more money
(e) proper quality assurance program-mes.
Ans: d
107. Which one of the following represents a group
incentive plan ?
(a) Halsey Premium Plan
(b) Bedaux Plan
(c) Lincoln Plan
(d) Rowan Plan
(e) Taylor Plan.
Ans: c
108. The mathematical technique for finding the
best use of limited resources in an optimum
manner is known as
(a) operation research
(b) linear programming
(c) network analysis
(d) queuing theory
(e) break-even analysis.
Ans: b
109. In order that linear programming techniques
provide valid results
(a) relations between factors must be linear
(positive)
(b) relations between factors must be linear
(negative)
(c) (a) or (b)
(d) only one factor should change at a time, others
remaining constant
(e) none of the above.
Ans: c
110. The linear programming techniques can be
applied successfully to industries like
(a) iron and steel
(b) food processing
(c) oil and chemical
(d) banking
(e) all of the above.
Ans: e
111. The simplex method is the basic method for
(a) value analysis
(b) operation research
(c) linear programming
(d) model analysis
(e) none of the above.
Ans: c
112. The two-bin system is concerned with
(a) ordering procedure
(b) forecasting sales
(c) production planning
(d) despatching and expediting
(e) none of the above.
Ans: a
113. The time required to complete a job is
established and a bonus is paid to the worker
based on the exact % of time
saved. This type of incentive plan is known as
(a) Dry work Plan
(b) Halsey Premium Plan
(c) Taylor Plan
(d) Bedaux Plan
(e) Rowan Plan.
Ans: e
114. Replacement studies are made on the fol-
lowing basis:
(a) annual cost method
(b) rate of return method
(c) total life average method
(d) present worth method
(e) any one of the above.
Ans: e
115. String diagram is used
(a) for checking the relative values of various
layouts
(b) when a group of workers are working at a place
(c) where processes require the operator to be
moved from one place to another
(d) all of the above
(e) none of the above.
Ans: d
116. Which of the following depreciation system
ensures that the interest be charged on the cost of
machine asset every year on the book value, but
the rate of depreciation every year remains
constant
(a) sinking fund method
(b) straight line method
(c) A-B-C charging method
(d) annuity charging method
(e) diminishing balance method.
Ans: d
117. Bin card is used in
(a) administrative wing
(b) workshop
(c) foundry shop
(d) stores
(e) assembly shop.
Ans: d
118. Slack represents the difference between the
(a) latest allowable time and the normal expected
time
(b) latest allowable time and the earliest expected
time
(c) proposed allowable time and the earliest
expected time
(d) normal allowable time and the latest expected
time
(e) project initiation tune and actual starting time.
Ans: b
119. PERT and CPM are
(a) techniques to determine project status
(b) decision making techniques
(c) charts which increase aesthetic appearance of
rooms
(d) aids to determine cost implications of project
(e) aids to the decision maker.
Ans: e
120. A big advantage of PERT over Gantt charts is
that in the former case
(a) activities and events are clearly shown
(b) early start and late finish of an activity are
clearly marked
(c) activity times are clear
(d) critical path can be easily determined
(e) inter-relationship among activities is clearly
shown.
Ans: e
121. CPM is the
(a) time oriented technique
(b) event oriented technique
(c) activity oriented technique
(d) target oriented technique
(e) work oriented technique.
Ans: c
122. PMTP (predetermined motion time systems)
include
(a) MTM (method time measurement)
(b) WFS (work factor systems)
(c) BNTS (basic motion time study)
(d) all of the above
(e) none of the above
Ans: d
123. Work study comprises following main
techniques
(a) method study and work measurement
(b) method study and time study
(c) time study and work measurement
(d) method study and job evaluation
(e) value analysis and work measurement.
Ans: a
124. Which of the following equations is not in
conformity with others
(a) organisation performance x motivation = profits
(b) knowledge x skill = ability
(c) ability x motivation = performance
(d) attitude x situation = motivation
(e) performance x resources
Ans: a
125. PERT is the
(a) time oriented technique
(b) event oriented technique
(c) activity oriented technique
(d) target oriented technique
(e) work oriented technique.
Ans: b
126. The basic difference between PERT and CPM
is that
(a) PERT deals with events and CPM with activities
(b) critical path is determined in PERT only
(c) costs are considered on CPM only and not in
PERT
(d) guessed times are used in PERT and evaluated
times in CPM
(e) PERT is used in workshops and CPM in plants.
Ans: d
127. PERT stands for k (fit) project evaluation and
review technique
(b) project examination and review technique
(c) project evaluation and reporting technique
(d) process execution and reporting technology
(e) project execution and results technique.
Ans: a
128. Queuing theory is used for
(a) inventory problems
(b) traffic congestion studies
(c) job-shop scheduling
(d) all of the above
(e) none of the above.
Ans: d
129. In queuing theory, the nature of the waiting
situation can be studied and analysed
mathematically if
(a) complete details'of items in, waiting line are
known
(b) arrival and waiting times are known and can be
grouped to form a waiting line model
(c) all variables and constants are known and form
a linear equation
(d) the laws governing arrivals, service times, and
the order in which the arriving units are taken into
source are known
(e) all of the above.
Ans: d
130. Queuing theory is associated with
(a) sales
(b) inspection time
(c) waiting time
(d) production time
(e) inventory.
Ans: c
131. The reasons which are basically responsible
for the formation of a queue should be that
(a) the average service rate Hess than the average
arrival rate
(b) output rate is linearly proportional to input
(c) output rate is constant and the input varies in a
random manner
(d) all of the above
(e) none of the above.
Ans: d
132. Monte Carlo solutions in queuing theory are
extremely useful in queuing problems
(a) that can't be analysed mathematically
(b) involving multistage queuing
(c) to verify mathematical results
(d) all of the above
(e) none of the above.
Ans: a
133. In perpetual inventory control, the material is
checked as it reaches its
(a) minimum value
(b) maximum value
(c) average value
(d) middle value
(e) alarming value.
Ans: a
134. A milestone chart
(a) shows the inter dependences of various jobs
(b) depicts the delay of jobs, if any
(c) points outgoing ahead of schedule of jobs, if any
(d) all of the above
(e) none of the above.
Ans: e
135. Bar charts are suitable for
(a) minor works
(b) major works
(c) large projects
(d) all of the above
(e) none of the above.
Ans: a
136. The first method invented for planning
projects was
(a) bar chart method
(b) milestone chart
(c) critical path method (CPM)
(d) programme evaluation and review technique
(PERT)
(e) none of the above.
Ans: a
137. Pick up the correct statement from the
following
(a) programmer evaluation and review technique is
event oriented
(b) programmer evaluation and review technique is
not event oriented
(c) critical path method is event oriented
(d) critical.path method is not activity oriented
(e) none of the above.
Ans: e
138. Pick up the correct statement from the
following
(a) critical path method is an improvement upon
bar chart method
(b) critical path method provides a realistic
approach to the daily problems
(c) critical path method avoids delays which are
very common in bar chart
(d) critical path method was invented by Morgan R.
Walker of Dupot and James E. Kelley of Remington
U.S.A in 1957
(e) all of the above.
Ans: e
139. Pick up the correct step used for scheduling a
project by C.P.M.
(a) a project is divided into various activities
(b) required time for each activity is established
(c) sequence of various activities is made
according to their importance
(d) network is drawn by connecting the activities
and the events
(e) all of the above.
Ans: e
140. The time of completing a project in network
analysis is given by following time of the critical
activity meeting at the finalitiode
(a) early finish
(b) early start
(c) late start
(d) late finish
(e) none of the above.
Ans: a
141. The disadvantage of product layout is
(a) high initial investment for the specialized
facilities
(b) skilled labour to operate machines
(c) production time is longer, requiring more goods
in inventory
(d) high cost of inspection
(e) costly and complex production control.
Ans: a
142. Emergency rush order can be pushed more
effectively in
(a) job production
(b) automatic production
(c) continuous production
(d) intermittent production
(e) none of the above.
Ans: d
143. Routing assists engineers in deciding in
advance
(a) the flow of material in the plant
(b) the methods of proper utilization of manpower
(c) the methods of proper utilization of machines
(d) the layout of factory facilities
(e) normal route of workers through the plant.
Ans: c
144. The performance of a specific task in CPM is
known as
(a) dummy
(b) event
(c) activity
(d) contract
(e) none of the above.
Ans: c
145. Pick up the incorrect statement from the
following
(a) an activity of the project is denoted by an arrow
on the net work
(b) the tail of the arrow indicates the start of the
activity
(c) the head of the arrow indicates the end of,the
activity!
(d) the arrows are drawn (to scale from) left to
right
(e) each activity consumes a given time
Ans: d
146. The artificial activity; which indicates that an
activity following it cannot be started unless, the
preceding activity is complete, is known as
(a) event
(b) free float
(c) artificial
(d) constraint
(e) dummy.
Ans: e
147. A dummy activity
(a) is artificially introduced
(b) is represented by a dotted line
(c) does not require any time
(d) all of the above
(e) none of the above.
Ans: d
148. If E is the duration, ES and EF are die earliest
start and finish times, LS and LF are latest start
and finish times, then the following relation holds
good
(a) EF=ES+D
(b) LS=LF-D
(c) LF = LS + D
(d) D = EF-ES
(e) all of the above.
Ans: e
149. The difference between the time available to
do the job and the time required to do the job, is
known as
(a) event
(b) float
(c) duration
(d) constraint
(e) none of the above.
Ans: b
150. The probability distribution of activity times in
PERT follows following distribution
(a) normal
(b) binomial
(c) beta
(d) exponential
(e) Gaussian.
Ans: c
151. The probability distribution of project
completion in PERT follows following distribution
(a) normal
(b) binomial
(c) beta
(d) exponential
(e) Gaussian.
Ans: e
152. If TL is the largest allowable event
occurrence time, total activity slack (s) is equal to
(a) latest start time - earliest start time
(b) latest finish time - earliest finish time (EFT)
(c) TL-EFT
(d) all of the above
(e) none of the above.
Ans: d
153. The critical activity has
(a) maximum float
(p) minimum float
(c) zero float,
(d) average float
(e) none of these.
Ans: c
154. The time by which the activity completion time
can be delayed without affecting the start of
succeeding activities, is Known as
(a) duration
(b) total float
(c) free float
(d) interfering float
(e) none of the above.
Ans: c
155. The critical path of a network represents
(a) the minimum time required for completion of
project
(b) the maximum time required for completion of
project
(c) maximum cost required for completion of
project
(d) minimum cost required for completion of
project
(e) none of the above.
Ans: a
156. Pick up the correct statement from the
following
(a) the float may be positive, zero or negative
(b) if the float is positive and the activity is delayed
by a period equal to its total float, the completion of
project in not delayed
(c) if the float of an activity is negative, delay in its
performance is bound to delay the completion of
project
(d) if the float of an activity is zero, the activity is
critical and any delay in its performance will delay
the whole project
(e) all of the above.
Ans: e
157. Critical path moves along the activities having
total float of
(a) positive value
(b) negative value
(c) zero value
(d) same value
(e) none of the above.
Ans: c
158. Critical Path Net Work helps an engineer
(a) to concentrate his attention on critical activities
(b) to divert the resources from non-critical
advanced activities to critical activities
(c) to be cautious for avoiding any delay in the
critical activities to avoid delay of the whole project
(d) all of the above
(e) none of the above.
Ans: d
159. Pick up the correct statement about
relationship between various floats
(a) free float = total float
(b) independent float = total float
(c) independent float > free float
(d) free float > total float
(e) independent float < free float.
Ans: e
160. The time which results in the least possible
direct cost of an activity is known as
(a) normal time
(b) slow time
(c) crash time
(d) standard time
(e) none of the above.
Ans: b
161. The technique for establishing and maintaining
priorities among the various jobs of any project is
known as
(a) event flow scheduling technique
(b) critical ratio scheduling
(c) slotting technique for scheduling
(d) short interval scheduling
(e) none of the above.
Ans: b
162. Pick up the incorrect statement from the
following. A critical ratio scheduling
(a) establishes the relative priorities among
various activities on a common basis
(b) determines the status of each activity
(c) adjusts automatically changes in activity
progress
(d) is a dynamic system
(e) none of the above.
Ans: e
163. PERT is
(a) an analytic tool in concept
(b) limit up of event oriented diagrams
(c) used for research and development projects
(d) based on three time estimates for activities
linking up two events
(e) all of the above.
Ans: e
164. CPMis
(a) synthesising in concepts
(b) is built of activities oriented program-mes
(c) is, based on one time eytimate
(d) is used for repetitive works
(e) all of the above.
Ans: e
165. A CPM family includes
(a) CPA (Critical Path Analysis)
(b) CPP (Critical Path Plotted)
(c) MCE (Minimum Cost Expenditure)
(d) CPS (Critical Path Scheduling)
(e) all of the above.
Ans: e
166. PERT/CPM, techniques can be used for
following applications
(a) once through project
(b) maintenance jobs
(c) research and development
(d) all non-technical jobs
(e) all of the above.
Ans: e
167. PERT analysis is based on
(a) optimistic time
(b) pessimistic time
(c) most likely time
(d) all of the above
(e) none of the above.
Ans: d
168. Descripancies of bar chart techniques are
(a) consequential effects of lack in one activity on
omer
(b) consequential effects of lack in one activity on
the finish date
(c) free time available for an activity can't be
predicted
(d) effective monitoring/controlling can't be done
(e) all of the above.
Ans: e
169. O on a PERT/CPM chart represents
(a) an ordinary event
(b) a significant event representing some mile-
stone
(c) an event to be transferred to other network
chart
(d) dangling event
(e) dummy event.
Ans: a
170. Pick up the correct statement. Dummy
activity on a PERT/CPM chart means, it
(a) consumes time, but no resources
(b) consumes resources but no time
(c) consumes neither time nor resources
(d) is a dangling event
(e) consumes both resources and time.
Ans: c
171. Criticalpath on PERT/CPM chart is obtained
by joining the events having
(a) maximum slack
(b) minimum slack
(c) average slack
(d) no slack
(e) judgement and experience.
Ans: b
172. Slack of various events on the critical path in
PERT/CPM chart
(a) increases continuously
(b) decreases continuously
(c) remains constant
(d) may increase or decrease depending on
various factors
(e) unpredictable.
Ans: c
173. The assumption in PERT is
(a) a project will always be behind schedule, if left
uncorrected
(b) cost of project will always be more than the
estimated cost, if no timely corrections are taken
(c) a project can be subdivided into a set of
predictable, independent activities
(d) activities are fixed and can't be changed ,
(e) commissioning time can be changed, if
activities are behind schedule.
Ans: c
174. Activity s,lack or float of any event on a
PERT/CPM chart is represented by
(a) latest start time of succeeding event -earliest
finish time of preceding event activity time
(b) latest start time of the event - earliest start
time of the event
(c) latest finish time of event - earliest finish time
of the event
(d) anyone of the above
(e) none of the above.
Ans: d
175. The important file in making a PERT is
(a) an event can't be accomplished until activities
leading to it are completed
(b) no activity from any event can be started from
preceding event till it is completed
(c) length of arrow has nothing to do with time
(d) every activity must be completed before end
point is reached
(e) all of the above.
Ans: e
176. An event is indicated on the network by
(a) a straight line
(b) a number enclosed in a circle or a square
(c) a straight line with circles at the ends
(d) a dotted line
(e) an arrow.
Ans: b
177. In a PERT chart
(a) all activities should be numbered
(b) only important activities should be numbered
(c) only critical activities are numbered
(d) only selected activities are numbered
(e) no activity is numbered.
Ans: a
178. Positive slack on a PERT indicates that
project is
(a) ahead of schedule
(b) beyond schedule
(c) as per schedule
(d) on critical path
(e) none of the above.
Ans: a
179. Pessimistic time is
(a) the maximum time which an activity might
require
(b) the average time required for a job
(c) the most probable time considering all
conditions
(d) the minimum time in which an activity can
possibly be accomplished
(e) the earliest finish.
Ans: a
180. In PERT analysis, critical path is obtained by
joining events having
(a) +ve slack
(b) -ve slack
(c) zero sldck
(d) dummy activities
(e) critical activities.
Ans: c

How should GATE be cracked within 3 months ?

The answer for that question solely depends on You.

Here are some points that would help you :

1. Analyze Yourself

I am just a random guy on the internet,you can't. solely depend on my answer. First try to analyze yourself. Go through the syllabus and make a note that how much good you're with your syllabus. You can find the amount of syllabus you've covered by this prepmeter.
Analyze your preparation level

2. How Good are you?

Now you have gone through your syllabus and can know your weak topics.Try to focus more on them.Try to allocate as much as time as possible for those topics.And be intelligent enough to leave the topics that aren't necessary.

3.Follow Standard Textbooks

I can't stress that enough.Majority of my friends who are preparing for GATE exams bought some Mock test papers and were trying to solve them.They are more interested in knowing the technique than learning the topic.They all stuck with all the topics and were solely relying on the
"key".Don't be such kind of a person.Learn from standard textbooks they help you in clearing your basics.

Education is like a house,the basement has to be strong for the house to cherish.

4.Connect Everything

I once read a quote,it says like

" Education is learning random things.Knowledge is about
connecting all those things".

All your subjects are related to one another. So if you read a subject well then it will help you in understanding the other subject. Study SOM before MD. (Sorry! I'm a ME guy).

5.Practice.

Practice and Practice even more Lock up yourself in a room.Study a subject and solve all the questions regarding that subject in previous papers.There will be some topics in which the IIT's concentrate more.Find them and practice them even harder.If you're in college,Read the topics at home and go sit in the last bench of your class and try solving those questions. Never stop practicing.

6.Success comes at a pay

As the GATE exam is about to approach just try to give more time for your preparation.There will be lot
of time you would have been wasting in your day. Just try to minimize that.
DON'T USE INTERNET UNLESS IT IS ACADEMIC ORIENTED.(You can have
a little relaxing time on it but make sure it doesn't count as a distraction).

Give all of your effort.

What is wrong with the Indian education system in terms of growth?

Read all the answers before agreeing to the following consolidation.

The main types of answers appear to be:

1) Half the country does not even have access to proper education, and only a small fraction can go to university.

- Lack of quality primary education for the poor

- Limited seats in Universities

2) Everything is about rote memorization, leading to behaviour which encourages cramming and
forgetting rather than life long learning.

3) Standardized testing determines everything, and aptitude of students is not recognized outside this format

4) Lack of diversity in the subjects you can take in college (e.g. can't double major in Math and German. like you can in the USA)

5) Extreme pressure from parents / society to use education for financial security = CSE degrees for programming jobs or medicine. Societal pressure to get into the "right schools", not only for the
education aspect but to ensure good job/ marriage prospects, in general success in life. Little incentive to take risks and follow own interests or encourage creativity. Generally conformist culture, which makes educational achievement the only thing that matters to social standing.

6) Additional extreme pressure due to limited seats resulting in very intense competition between students.

7) Reservation system

8) Management quota system What is management quota?

9) Government control of education/ Government Monopoly in education.

10) Right to Education Act.

11) Education sector is closed to for-profit organizations.

12) Few opportunities and flexibility to cross over into different streams of education.

What is wrong with Indian Education?

So..what is the definition of wrong when it comes to education ?

Lack of well rounded education . Nerds are restricted to books while jocks are restricted to practice nets. Unfortunately, nerds can benefit a lot from sports and learn team dynamics and how to work along with other people. Jocks on the other hand can learn a few things like critical thinking and logical reasoning.

Absence of disruptive innovators and rebels in our society . Like the commonly quoted Steve Jobs, we do have a lack of innovators (small when compared to our huge population) in our country.

What we instead have in our country is nation of sloggers who are restricted by our underdeveloped society's definition of success and cramming in spite of unhappiness to get into an engineering college and later to get the next promotion. This is completely done irrespective of if they actually care about the subject and work but rather by social conditioning which deludes them into thinking this how they can attain salvation.

Is it unfair to compare India with say...United States ?

Well take a completely unrelated metric ..life expectancy and compare the US, India and Singapore. Singapore was chosen by me because in the lifetime of our previous generation it managed to go from an under developed third world to a first world country. Now if you look at something as basic as life expectancy, India completely lacks behind US and Singapore with a life expectancy of something around 65. That would literally mean, if you are in your 30s, more than half of your life
is gone (yes you can argue it is for the entire nation and not specifically the urban population.) Anyway coming back to life expectancy, India is where Singapore was in the 1960s.

Now what does that say to us ?

India is still in the "survival mode" . Since its creation in 1947, we have been and still are in the "survival mode". What happens in the survival mode is that we do cost-benefit analysis of every decision in our lives and unfortunately in education, career as well as marriage. This explains why engineering is the overwhelming choice of the majority of the people in this country and in similar countries like China (who smartly have also recognized the potential of studying finance.) After we leave the "survival mode" as a nation, then only we will reach the developed stage like US and Canada where a significant fraction will choose subjects which they actually like and rather not forced by society to choose. After that when we reach the "Uber-Developed" status like Scandinavian countries, then the majority of our country, free of financial constraints will pursue their dreams.

Inspite of all this if we look at the enrollment in tertiary education in both US and India (assuming the correctness of the data, they are amazingly similar with approximately 20% enrollment with India doing better). As per the Annual Status of Education Report (ASER) 2012, 96.5% of all rural children between the ages of 6-14 were enrolled in school. This is the fourth annual survey to report enrollment above 96%. 83% of all rural 15-16 year olds were enrolled in school. However, going forward, India will need to focus more on quality.Gross enrollment at the tertiary level has crossed 20% (as per an Ernst & Young Report cited in Jan 2013 in Education News/ minglebox.com "In 2006, 19.5 percent of the adult population had attended college but had no degree, 7.4 percent held an associate's degree , 17.1 percent held a bachelor's degree , and 9.9 percent held a graduate or professional degree . The historic gender gap had practically vanished. New England had the highest proportion of college graduates, and the South Central states the lowest. "

So what is wrong with our curriculum ?

Actually nothing. Our curriculum is perfect and better than most countries. We are taught a vast majority of subjects (we will get to teaching methods later) which will allow us to recognize where our interest lies later in life. Hardly do you get Shakespeare and C++ being taught at high school level in developing country. Even in a developed country like Singapore, the syllabus is not so vast and people who might take History will not end up taking Geography. Unfortunately, our co-curricular activities lack behind a lot which would actually produce a well rounded individual. We end up being egoistical, individualistic narrow minded individual. However, till this crazy competition goes away, I doubt if any importance will be paid to co- curricular activities.

So who are we to blame ?

Parents, Teachers and Society "Cost Benefit Analysis of every Career Decision" When was the last time anyone studied engineering especially ECE because they liked it? They had been tinkering with circuits since young, taking apart radios and other stuff. When was the last time we studied anything because we liked doing it not because we can quote a huge starting annual salary?

Another consequence of the country being in the "survival mode", is that the insecurities of the parents are passed to the children over time and the ultimate objective is to achieve financial stability in whichever way possible.

"Myopic Definition of Success"

Standard definition of success common in our society is getting into a top engineering college followed by working in an unrelated field which would pay the most followed by getting into a B School to work in a field which you did not know even existed when you were in high school. Although I congratulate the successful ones from the top schools, what concerns me is that the definition of success is extremely myopic. Life is a long, long journey and although this might give you a good start, it will never determine where you end up.

In this way I will argue that we should stop blaming reservation as a curse of our society. Reservations can only stop you to a certain point and blaming them for "ruining your whole life" is extremely short sighted.

"Nation of Conformists"

We although will hate to admit, are a nation of conformists. Adventure and risk taking as a whole is just lacking in our DNA. We never explored China during ancient times (Marco Polo came from Italy), we never bothered to go to Africa till there were jobs for us. We are shit scared to be different. Every career decision is approved by our parents and society. We are just afraid of making a mistake and being pointed at. This comes from the very fact that since childhood, our teachers will label anyone different to be a "problem child" who needs psychiatric help, thanks to their limitations as incomplete human beings. We are so scared that we even make our parents choose our life partners.

Sometimes this delusion and comfort in success are gone by our early 30s and for the first time we want to live for ourselves. Unfortunately thanks to our small life expectancy and probably a family and child to support, this becomes a dream which we can never fulfill. Have you noticed why your father is grumpy all the time...this might be the very reason..!!

So is there any hope left ?

Yes! there is. This new generation is slowly breaking conventions and we are seeing more artists, more designers, more scientists.
Things will be much better by the next generation when people will choose careers out of their own free will.

Mechanical Engineering Vision

Pages

Thursday, 15 January 2015

How to prepare for GATE, PSU, IES?

How To Prepare For GATE, IES, PSU by S.K. Mondel?

Friday, 9 January 2015

MORE EBOOKS AND LECTURE VIDEOS FORENGINEERING STUDENTS

Monday, 17 November 2014

Top 10 Most Amazing Elements

Wednesday, 29 October 2014

180 TOP Production Technology - Mechanical Engineering Multiple choice Questions and Answers

How should GATE be cracked within 3 months ?

What is wrong with the Indian education system in terms of growth?

What is wrong with Indian Education?

So..what is the definition of wrong when it comes to education ?